How To Transfer DigitalOcean Spaces Between Regions Using Rclone

Introduction

DigitalOcean Spaces is an object storage service designed to make it easy and cost effective to store and serve large amounts of data.

In this guide, we will cover how to migrate data between Spaces regions, by using Rclone to transfer data between two Spaces. We will demonstrate how to install Rclone, the configuration settings needed to access multiple regions, and the commands that you can use to synchronize your files between regions and verify their integrity.

Creating API Keys and Finding Spaces Endpoint Information

Before we begin installing and configuring Rclone to copy our objects between Spaces, we will need some information about our DigitalOcean Spaces account. We will need a Spaces API key, and we will need to know the regions and names of our source and destination Spaces.

Generating a DigitalOcean Spaces API Key

To create a DigitalOcean Spaces API key, follow the “Creating an Access Key” section of our How To Create a DigitalOcean Space API Key documentation.

Save the access key ID and the secret key. We will use them later to configure Rclone to access our account.

Finding the Spaces S3-Compatible Endpoint

Next, we need to find the endpoint for each Space. You can view the Space’s endpoint within the DigitalOcean Control Panel by selecting the Space and viewing the Settings tab:

The endpoint will always be the region you created the Space in, followed by .digitaloceanspaces.com. Make note of the endpoint for both of your Spaces. Will we use this information when creating our rclone configuration.

Installing Rclone

You’re now ready to install Rclone. You can do this on your local machine, or – if you are bandwidth limited – you may want to install Rclone on a Droplet located in the source or destination Spaces region.

Visit the Downloads section of the project’s website to find binaries of the utility compiled for different platforms. Download the zipped binary that matches your computer’s operating system to get started.

Once you have the Rclone zip file downloaded to your computer, follow the section below that matches your platform.

Linux

Before we can extract the archive, we will need to ensure that the unzip utility is available.

If you are running Ubuntu or Debian, you can update the local package index and install unzip by typing:

 	
sudo apt update

 	
sudo apt install unzip

If you are running CentOS or Fedora, you can install unzip by typing:

 	
sudo yum install unzip

With unzip installed, navigate to the directory where you downloaded the rclone zip file:

 	
cd ~/Downloads

Next, unzip the archive and move into the newly created directory:

 	
unzip rclone*

 	
cd rclone-v*

From here, we can copy the binary to the /usr/local/bin directory so that it is available system-wide:

 	
sudo cp rclone /usr/local/bin

Next, we add the manual page to our system, so that we can easily get help on the command syntax and available options. Make sure that the local manual directory is available and then copy the rclone.1 file:

 	
sudo mkdir -p /usr/local/share/man/man1

 	
sudo cp rclone.1 /usr/local/share/man/man1

Then update the man database to add the new manual page to the system:

 	
sudo mandb

Finally, we can create the Rclone configuration directory and open up a configuration file:

 	
mkdir -p ~/.config/rclone

 	
nano ~/.config/rclone/rclone.conf

This will open your text editor with a new blank file. Skip ahead to the section on Configuring Rclone to continue.

macOS

If you are running macOS, begin by navigating in the terminal to the directory where you downloaded the rclone zip file:

 	
cd ~/Downloads

Next, unzip the file and move into the newly created directory:

 	
unzip -a rclone*

 	
cd rclone-v*

Next, make sure the /usr/local/bin directory is available and then copy the rclone binary to it:

 	
sudo mkdir -p /usr/local/bin

 	
sudo cp rclone /usr/local/bin

Finally, we can create the configuration directory and open up a configuration file:

 	
mkdir -p ~/.config/rclone

 	
nano ~/.config/rclone/rclone.conf

This will open up your text editor with a new blank file. Skip ahead to the section on Configuring Rclone to continue.

Windows

If you are running Windows, begin by navigating to the Downloads directory in the Windows File Explorer. Select the rclone zip file and right-click. In the context menu that appears, click Extract All…:

Follow the prompts to extract the files from the zip archive.

The rclone.exe utility must be run from the command line. Open a new Command Prompt (the cmd.exe program) window by clicking the Windows button in the lower-left corner, typing cmd, and selecting Command Prompt.

Inside, navigate to the rclone path you extracted by typing:

 	
cd "%HOMEPATH%Downloadsrclone*rclone*"

List the directory contents to verify that you are in the correct location:

 	
dir

Output
10/23/2017  01:02 PM              .
10/23/2017  01:02 PM              ..
10/23/2017  01:02 PM                17 git-log.txt
10/23/2017  01:02 PM           296,086 rclone.1
10/23/2017  01:02 PM        16,840,192 rclone.exe
10/23/2017  01:02 PM           315,539 README.html
10/23/2017  01:02 PM           261,497 README.txt
               5 File(s)     17,713,331 bytes
               2 Dir(s)  183,296,266,240 bytes free

You will need to be in this directory whenever you want to use the rclone.exe command.

Note: On macOS and Linux, we run the tool by typing rclone, but on Windows, the command is called rclone.exe. Throughout the rest of this guide, we will be providing commands as rclone, so be sure to substitute rclone.exe each time when running on Windows.

Next, we can create the configuration directory and open up a configuration file to define our S3 and Spaces credentials:

 	
mkdir "%HOMEPATH%.configrclone"

 	
notepad "%HOMEPATH%.configrclonerclone.conf"

This will open up your text editor with a new blank file. Continue ahead to learn how to define your Spaces regions in the configuration file.

Configuring Rclone

We will configure our two DigitalOcean Spaces regions as Rclone “remotes” in the Rclone configuration file. Paste the following section in the configuration file to define the first region:

[spaces-sfo2]
type = s3
env_auth = false
access_key_id = your_spaces_access_key
secret_access_key = your_spaces_secret_key
endpoint = sfo2.digitaloceanspaces.com
acl = private

Here, we define a new rclone “remote” named spaces-sfo2. Change the region name to match the Spaces region you are configuring.

We set the type to s3 so that rclone knows the appropriate way to interact with and manage the remote storage resource. We will define the Spaces access credentials in this configuration file, so we can set env_auth to false.

Next, we set the access_key_id and secret_access_key variables to our Spaces access key and secret key, respectively. Be sure to change the values to the credentials associated with your account.

We set the endpoint to the Spaces endpoint we looked up earlier.

Finally, we set the acl to private to protect our assets until we want to share them.

Next, make a duplicate of the configuration block you just created, then update the name and endpoint region to reflect your second region:

. . .

[spaces-nyc3]
type = s3
env_auth = false
access_key_id = your_spaces_access_key
secret_access_key = your_spaces_secret_key
endpoint = nyc3.digitaloceanspaces.com
acl = private

The rest of the configuration should remain the same as for the first region. Save and close the file when you are finished.

On macOS and Linux, be sure to lock down the permissions of the configuration file since our credentials are inside:

 	
chmod 600 ~/.config/rclone/rclone.conf

On Windows, permissions are denied to non-administrative users unless explicitly granted, so we shouldn’t need to adjust access manually.

Next, we’ll use rclone to explore our Spaces and sync data between them.

Copying Objects from S3 to Spaces

Now that our configuration is complete, we are ready to transfer our files.

Begin by checking the rclone configured remotes:

 	
rclone listremotes

Output
spaces-nyc3:
spaces-sfo2:

Both of the regions we defined are displayed.

We can view the available Spaces by asking rclone to list the “directories” associated with the remotes (make sure to add the colon to the end of the remote name):

 	
rclone lsd spaces-sfo2:

Output
-1 2019-09-23 13:07:54        -1 source-space

The above output indicates that one Space, called source-space was found in the sfo2 region.

You can repeat the procedure to view the other region:

 	
rclone lsd spaces-nyc3:

Output
-1 2019-09-23 13:08:28        -1 destination-space

To view the contents of a Space, you can use the tree command. Pass in the remote name, followed by a colon and the name of the “directory” you wish to list (the Space name):

 	
rclone tree spaces-sfo2:source-space

Output
/
├── Photos
│   ├── 2019.01.24-23.10.27.png
│   ├── 2019.01.24-23.11.39.png
│   ├── 2019.01.24-23.18.00.png
│   ├── 2019.01.24-23.18.18.png
│   ├── 2019.01.24-23.18.30.png
│   ├── 2019.01.24-23.19.32.png
│   ├── 2019.01.24-23.23.06.png
│   ├── 2019.01.24-23.23.53.png
│   ├── 2019.01.24-23.25.14.png
│   ├── 2019.01.24-23.26.22.png
│   ├── 2019.01.25-12.43.35.png
│   ├── 2019.03.13-14.35.34.png
│   └── 2019.03.13-14.40.52.png
└── Photos.zip

1 directories, 14 files

When you are ready, you can copy the files between Spaces by typing:

 	
rclone sync spaces-sfo2:source-space spaces-nyc3:destination-space

Assuming everything went well, rclone will begin copying objects between the two Spaces.

Note: If you hadn’t previously created the destination Space in the specified region, rclone will attempt to create one for you with the given name. This will fail if the name provided is already being used by another account or if the name doesn’t meet the naming requirements for DigitalOcean Spaces (lowercase letters, numbers, and dashes only).

When the transfer is complete, you can check that the objects have transferred by viewing them with the tree subcommand:

 	
rclone tree spaces-nyc3:destination-space

Output
/
├── Photos
│   ├── 2019.01.24-23.10.27.png
│   ├── 2019.01.24-23.11.39.png
│   ├── 2019.01.24-23.18.00.png
│   ├── 2019.01.24-23.18.18.png
│   ├── 2019.01.24-23.18.30.png
│   ├── 2019.01.24-23.19.32.png
│   ├── 2019.01.24-23.23.06.png
│   ├── 2019.01.24-23.23.53.png
│   ├── 2019.01.24-23.25.14.png
│   ├── 2019.01.24-23.26.22.png
│   ├── 2019.01.25-12.43.35.png
│   ├── 2019.03.13-14.35.34.png
│   └── 2019.03.13-14.40.52.png
└── Photos.zip

1 directories, 14 files

For more robust verification, use the check subcommand to compare the objects in both regions:

 	
rclone check spaces-sfo2:source-space spaces-nyc3:destination-space

Output
2019/09/23 14:29:11 NOTICE: S3 bucket destination-space: 0 differences found
2019/09/23 14:29:11 NOTICE: S3 bucket destination-space: 14 matching files

This will compare the hash values of each object in both remotes. You may receive a message indicating that some hashes could not be compared. In that case, you can rerun the command with the --size-only flag (which just compares based on file size) or the --download flag (which downloads each object from both remotes to compare locally) to verify the transfer integrity.

Conclusion

In this guide, we’ve covered how to transfer objects between two DigitalOcean Spaces regions. We gathered API credentials and endpoint information from the Spaces service, installed and configured the rclone utility on our local computer, and then copied all objects from a source Space to a destination Space.

The rclone client can be used for many other object storage management tasks including uploading or downloading files, mounting Spaces on the local filesystem, and creating or deleting additional Spaces. Check out the man page to learn more about the functionality the tool provides.