How To Define and Use Handlers in Ansible Playbooks

In a nutshell, handlers are special tasks that only get executed when triggered via the notify directive. Handlers are executed at the end of the play, once all tasks are finished.

In Ansible, handlers are typically used to start, reload, restart, and stop services. If your playbook involves changing configuration files, there is a high chance that you’ll need to restart a service so that the changes take effect. In this case, you’ll need to define a handler for that service and include the notify directive in any tasks that require that service handler.

In a previous section of this series, you’ve seen how to use a template to replace the default Nginx page with a custom HTML landing page. In practice, when setting up your Nginx web server, you’re most likely going to include new server block files in your sites-available directory, create symbolic links, or change settings that require a server reload or restart.

Considering such a scenario, this is how a handler to restart the Nginx service would look like:

...
  handlers:
    - name: Restart Nginx
      service:
        name: nginx
        state: restarted     

To trigger this handler, you’ll need to include a notify directive in any task that requires a restart on the Nginx server.

The following playbook replaces the default document root in Nginx’s configuration file using the built-in Ansible module replace. This module looks for patterns in a file based on a regular expression defined by regexp, and then replaces any matches found with the content defined by replace. The task then sends a notification to the Restart Nginx handler for a restart as soon as possible. What that means is, it doesn’t matter how many times you trigger the restart, it will only happen when all tasks are already finished executing and the handlers start running. Additionally, when no matches are found, no changes are made to the system, and for that reason the handler is not triggered.

Create a new file called playbook-12.yml in your ansible-practice directory:

nano ~/ansible-practice/playbook-12.yml

Add the following lines to the new playbook file:

---
- hosts: all
  become: yes
  vars:
    page_title: My Second Landing Page
    page_description: This is my second landing page description.
    doc_root: /var/www/mypage

  tasks:
    - name: Install Nginx
      apt:
        name: nginx
        state: latest

    - name: Make sure new doc root exists
      file:
        path: "{{ doc_root }}"
        state: directory
        mode: '0755'

    - name: Apply Page Template
      template:
        src: files/landing-page.html.j2
        dest: "{{ doc_root }}/index.html"

    - name: Replace document root on default Nginx configuration
      replace:
        path: /etc/nginx/sites-available/default
        regexp: '(s+)root /var/www/html;(s+.*)?$'
        replace: g<1>root {{ doc_root }};g<2>
      notify: Restart Nginx

    - name: Allow all access to tcp port 80
      ufw:
        rule: allow
        port: '80'
        proto: tcp

  handlers:
    - name: Restart Nginx
      service:
        name: nginx
        state: restarted

Save and close the file when you’re done.

One important thing to keep in mind when using handlers is that they are only triggered when the task that defines the notify trigger causes a change in the server. Taking this playbook into account, the first time it runs the replace task it will change the Nginx configuration file and thus the restart will run. In subsequent executions, however, since the string to be replaced is not present in the file anymore, the task won’t cause any changes and won’t trigger the handler execution.

Remember to provide the -K option if you run this playbook, since it requires sudo permissions:

ansible-playbook -i inventory playbook-12.yml -u sammy -K

Output
BECOME password: 

PLAY [all] **********************************************************************************************

TASK [Gathering Facts] **********************************************************************************
ok: [203.0.113.10]

TASK [Install Nginx] ************************************************************************************
ok: [203.0.113.10]

TASK [Make sure new doc root exists] ********************************************************************
changed: [203.0.113.10]

TASK [Apply Page Template] ******************************************************************************
changed: [203.0.113.10]

TASK [Replace document root on default Nginx configuration] *********************************************
changed: [203.0.113.10]

TASK [Allow all access to tcp port 80] ******************************************************************
ok: [203.0.113.10]

RUNNING HANDLER [Restart Nginx] *************************************************************************
changed: [203.0.113.10]

PLAY RECAP **********************************************************************************************
203.0.113.10                : ok=7    changed=4    unreachable=0    failed=0    skipped=0    rescued=0    ignored=0   

If you look at the output, you’ll see the “Restart Nginx” handler being executed just before the end of the play. If you go to your browser and access the server’s IP address now, you’ll see the following page:

In the next and final part of this series, we’ll connect all the dots and put together a playbook that automates setting up a remote Nginx server to host a static HTML website.